Janome Accessories

Special Janome Bobbin Holder for Free-Motion Quilting: For machines with Auto Thread Cutter (scissor button)* Couple the convertible Free Motion Quilting Foot with this handy Bobbin Holder. This Janome Bobbin Holder is pre-set with lower tension - it is an optional accessory with the same structure as your original bobbin case, but the tension is pre-set approximately 40% lower - to make it even e…

Special Bobbin Holder for Free-Motion Quilting: For machines that don't have an Auto Thread Cutter (scissor button)*, not suitable for MC10001, MC10000, MC9700, MC9500 and MC8000. Couple the convertible Free Motion Quilting Foot with this handy Bobbin Holder. This Janome Bobbin Holder is pre-set with lower tension - it is an optional accessory with the same structure as your original bobbin case,…

Suitable for ALL Janome machines (except the 1600P). There is no generic plastic bobbin which will fit all makes of machines, consequently there are several different sized bobbins on the market. Using the incorrect size and type of bobbin in your machine can affect stitch quality and could possibly cause damage to your bobbin case and machine. Only use Janome bobbins in your Janome machine and ne…

This Janome Circular Sewing Attachement is suitable for models with a square plastic hook cover/slide plate (please check with us, if you are unsure) The Janome circular stitcher is the ideal attachment for sewing circles using either straight stitch, zig-zag, decorative stitches or even lettering. Circles 5cm to 26cm in diameter are stitched perfectly using this very popular attachment, so essent…

This Janome Bayonet Base Light Bulb is suitable for Janome models: 415, 423S, J1012, JL1024, JL150, JL125, Jem Gold Plus, 2200XT, JL110, SMD500, 7025, 525S, LX180, 2070, DEX20, DEX25, DEXHD, 1100HD, 216S. This replacement light bulb is only for the models listed...Please make sure you purchase the correct attachment for your particular machine - please check with us if you are unsure.

This Janome Edison Base Light Bulb 240v, 14mm, is suitable for Janome models: JEM, JF, 1200D, CS1000. This replacement light bulb is only for the models listed...Please make sure you purchase the correct attachment for your particular machine - please check with us if you are unsure.

Janome wedge type light bulb 12v, 5watts This wedge type light bulb will fit the following models: 6125, 6260, 300E, 350E, 9500, 9700, DC3050, DC3018, 4100, XC50, XL30, 6500P, 6600P, 1600P, MC1600PQC, JL300, JL300C, JL250, 4623, Jubilee 85, MC5200, MC200E, MC4900, CXL301, BCC30, 8077, JLX2000, CP5000, SL30X, MC5900QC, DEX30

This Janome Needle Threader is a two-piece unit designed to fit the following Janome models: Atelier 7 Atelier 9 MC9400QCP MC14000 MC15000 500E ​​​​​​​

This Janome Sewing Machine Needle Threader Unit is for Janome sewing machine models: J3-18, J3-20, J3-24, DC4100, J1024, 3816, 4400, JL125, PS1030, JLX2000, 2200XT, CXL301, SL30X, JP760, 8050, DEX20, DEX25 and XS50. This is an easy push on replacement needle threader - we recommend removing the needle from your machine when replacing this unit. While the unit does click on easily, please take care…

This Janome Sewing Machine Needle Threader Unit is for Janome sewing machine models: DC4030, DXL603, QXL605, XL601, MC5200, TXL607, DKS30 , DKS100, 230DC, 360DC, 2030DC, 4300QDC and 5060QDC. This is an easy push on replacement needle threader - we recommend removing the needle from your machine when replacing this unit. While the unit does click on easily, please take care when fitting and ensure…

The Janome Needle Threader can be used with all Janome models. Also works on any machine that uses a standard needle.

When you need to get a closer view, attach the Optic Magnifier to make it easy to see the tiniest detail under the needle. Useful when threading, adjusting the position of the fabric and carrying out detailed work. Three strengths of magnification included. Note: For use only with the following models MC15000, MC14000, MC9900, MC8900QCP, MC8200QC, MC9400QCP, Atelier 7 and Atelier 9

This stylish Houndstooth Janome overlocker carry bag is perfect for storing and transporting your Janome overlocker machine. This lightweight bag is a must have accessory, it keeps the machine safe and secure. There is plenty of space to store a foot control and instruction manual. The carry bag will fit all Janome 4 thread overlockers. Internal Dimensions: W 31cm x D 30cm x H 33cm

Designed by ruler guru Leonie West, this six piece template set from Janome will work perfect with the Janome Ruler Work Foot for your machine - they are designed to use with High Shank models only. Included is an instructional DVD on how to make your very own Ruler Travel Folder taught by none other than Leonie West herself! This kit is made up of six unique rulers with instructions on how to use…